- 1.00kg 이상 ~ 2.00kg 미만2,700원
- 2.00kg 이상 ~ 80.00kg 미만3,000원
시리얼 통신으로 제어되므로 전원선 VDD ,GND 두개와 시리얼통신신호 수신용 RX 선 한개, 총 3라인만 연결되면 됩니다. 3선 JST 케이블(별매)과 호환됩니다.
Description: This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.
Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.
SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.
Features:
Dimensions:
Documents:
- 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
- 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)
- 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 ) 단, 품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.
- 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.
ITEM REVIEW상품의 사용후기를 적어주세요.
게시물이 없습니다
ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.
글읽기 권한이 없습니다.
"19세 미만의 미성년자"는 출입을 금합니다!
no | subject | writer | data | hit |
---|---|---|---|---|
9 | 배송은 언제?? | 조근진 | 2018-09-04 | 2 |
8 | 배송은 언제?? | 아트로봇CT | 2018-09-04 | 0 |
7 | 시리얼 LCD 로 20x4 LCD 도 제어가능한지요 | 남영일 | 2014-10-24 | 2 |
6 | 시리얼 LCD 로 20x4 LCD 도 제어가능한지요 | 아트로봇 | 2014-10-24 | 1 |
5 | 시리얼통신이 된다는게말이죠 | 박상효 | 2012-10-12 | 110 |