판매가 | |
---|---|
할인판매가 | 15,000원 (15,000원 할인) |
할인금액 |
총 할인금액 원 (모바일할인금액 원) |
적립금 |
170원(170.00%) 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% |
제휴적립금 | |
배송방법 | 택배 |
배송비 | 2,700원 ~ 3,000원 |
상품 추가설명 번역정보 |
배송 | |
---|---|
수량 |
상품 정보 | 가격 | 삭제 |
---|---|---|
총상품금액(수량)0 |
알림. PC와 연결시 mini USB케이블 상품을 이용하시면 됩니다. (별매품)
제품소개: PC를 통해 아두이노를 프로그래밍하거나, PC와 아두이노간의 시리얼 통신 용도로 사용됩니다. 참고로 UNO는 본 변환기가 불필요합니다.
본 제품은 5V전원을 사용하는 아두이노 Pro, Pro Mini, Lilypad 제품을 위한 USB to Serial변환기이며 별도의 커넥터 없이 위의 제품들과 직결됩니다.
본 변환기는 6핀헤더를 기본 장착하여 TX, RX, POWER(5V), GND, DTR, CTS 출력이 제공되며 DTR핀에 의해 프로그래밍시 오토리셋이 지원되어 프로그래밍시마다 리셋 스위치를 누르는 불편함이 없습니다.
내장된 TX LED, RX LED를 통해 시리얼 통신상태를 손쉽게 파악할 수 있습니다.
주의사항.
본제품은5V형 제품입니다만아두이노 접속부 실크인쇄 정보가 (사진과 달리)3.3V로 표기되어 있습니다. 이는 3.3V형 제품과 PCB를 공유하기 때문인듯하며, 또한 약간의 개조를 통해 5V형과 3.3V형 모두를 지원할 수 있도록 제작되었기 때문인 것같습니다. 하지만, 오해의 소지가 많으므로 주의를 당부드립니다. 확인을 원하실 경우엔 뒷면의 3.3V, 5V 연결라인을 보시면 미세한 라인이 5V로 연결되어 있는것을 확인하 실 수 있습니다.
Description: This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Note: We know a lot of you prefer microUSB over miniUSB. Never fear, we’ve got you covered! Check out our FT231X Breakout for your micro FTDI needs!
Documents:
01. 결제(입금완료)완료 후 2-3일이내에 상품을 수령하실 수 있습니다. 02. 재고가 없거나 다시 재입고 될 경우(예약상품, 구두포함) 5-7일이 소요됩니다. 03. 배송비는 5만원 이상 구매시 무료 5만원 미만 구매시 2500원의 배송료가 있습니다.
반품은 반드시 정해진 택배사를 이용해주세요. 반드시 고객센터나 게시판을 통해 반품의사를 알려주신 후 제품을 보내주셔야 합니다. 연락없이 보내실경우 반품 및 교환이 불가능합니다. 반품 및 교환에 대한 자세한 사항은 아래의 내용을 참고해주세요.
제품을 받으신 후 일주일 이내에 교환, 반품신청을 하지 않았을 경우 고객님의 부주의로 인한 상품이 변형, 훼손 또는 파손 된 경우 제품이 오염되었을 경우 (립스틱, 화장품, 음식물 기타 오염물질로 인해) 제품을 착용 및 사용하거나, 제품의 택(라벨)이 제거 했거나, 제품을 수선, 수리, 세탁하였을 경우 반품 불가로 표기 된 상품을 구매한 경우 (니트류, 화이트계열, 세일상품 등) 반품 의사를 통보하지 않고 반품한 경우