[아두이노]  

[TSD12898] 아두이노 MIDI 콘트롤 쉴드(SparkFun MIDI Shield)

상품 정보
판매가
할인판매가 19,400원 (19,400원 할인)
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

270원(270.00%)

무통장 결제시 적립금%

카드 결제시 적립금%

실시간 계좌이체시 적립금%

적립금 결제시 적립금%

휴대폰 결제시 적립금%

예치금 결제시 적립금%

에스크로 결제시 적립금%

가상계좌 결제시 적립금%

가상계좌 결제시 적립금%

케이페이 결제시 적립금%

페이나우 결제시 적립금%

페이코 결제시 적립금%

카카오페이 결제시 적립금%

제휴적립금
배송방법 택배
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만 2,700원
  • 2.00kg 이상 ~ 80.00kg 미만 3,000원
닫기
상품 추가설명 번역정보
배송
수량 up down  
상품 목록
상품 정보 가격 삭제
총상품금액(수량)0
buy
buy
상품 상세페이지는 손가락으로 확대/축소가 가능합니다.

아두이노 장착형 MIDI 콘트롤 쉴드입니다.
MIDI 통신을통해 신디사이저, 시퀀서, 기타 음악기기들을 제어할 수 있습니다.
MIDI는 음악기기들간의 신호공유를 위해 재정된 표준규약입니다.
아두이노를 통해 이신호들을 송/수신하는것으로 다양한 음악기기 연동이 가능해집니다.

내장된 볼륨을 통해 악기의 볼륨, 피치, 톤 등을 제어할 수 있습니다.

RUN/PROG 스위치 선택을 통해 쉴드를 제거하지 않고도 아두이노의 프로그래밍이 가능합니다.

주의. 아두이노 결합용 커넥터 핀은 제공되지 않으며, 미디커넥터, 볼륨, 스위치는 사용자가 직접 장착해야 합니다.

 

Description: The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI’s event messages.

The SparkFun MIDI Shield provides an opto-isolated MIDI-IN port as well as a MIDI-OUT port. The MIDI Shield can be mounted directly on top of an Arduino, connecting the MIDI-IN to the Arduino’s hardware RX pin and the MIDI-OUT to TX. Potentiometers are connected to analog pins 1 and 2, and can be used to control volume, pitch, tone or anything else you’d like. The shield also comes with three momentary push buttons, a reset button, and green and red stat LEDs. The RUN/PROG switch allows you to program the Arduino over serial without having to remove the shield.

This revision of the SparkFun MIDI Shield also adds several configurable features, such as converting the MIDI output to a MIDI thru, and the option to use a software serial port for MIDI, leaving the hardware serial for programming and debugging. It also buffers the output, making it compatible with the Arduino Pro without needing to circumvent the protection resistors on the serial TX and RX lines.

Note: The MIDI Shield does not come with all parts soldered on. Two MIDI connectors, two trimpots, and three pushbuttons are included with the product and will need to be attached by the end user.

Includes:

  • SparkFun MIDI Shield PCB
  • 2x 5-pin DIN conectors
  • 2x 10K rotary potentiometer
  • 3x 12mm tactile pushbutton switches

Documents:






배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일

배송에 대해 알려드려요

01. 결제(입금완료)완료 후 2-3일이내에 상품을 수령하실 수 있습니다. 02. 재고가 없거나 다시 재입고 될 경우(예약상품, 구두포함) 5-7일이 소요됩니다. 03. 배송비는 5만원 이상 구매시 무료 5만원 미만 구매시 2500원의 배송료가 있습니다.

교환/반품시 반드시 확인해주세요.

반품은 반드시 정해진 택배사를 이용해주세요. 반드시 고객센터나 게시판을 통해 반품의사를 알려주신 후 제품을 보내주셔야 합니다. 연락없이 보내실경우 반품 및 교환이 불가능합니다. 반품 및 교환에 대한 자세한 사항은 아래의 내용을 참고해주세요.

교환/반품이 불가능한 경우입니다.

제품을 받으신 후 일주일 이내에 교환, 반품신청을 하지 않았을 경우 고객님의 부주의로 인한 상품이 변형, 훼손 또는 파손 된 경우 제품이 오염되었을 경우 (립스틱, 화장품, 음식물 기타 오염물질로 인해) 제품을 착용 및 사용하거나, 제품의 택(라벨)이 제거 했거나, 제품을 수선, 수리, 세탁하였을 경우 반품 불가로 표기 된 상품을 구매한 경우 (니트류, 화이트계열, 세일상품 등) 반품 의사를 통보하지 않고 반품한 경우

ITEM REVIEW

상품후기쓰기 모두보기

게시물이 없습니다

ITEM REVIEW

상품후기쓰기 모두보기

게시물이 없습니다

판매자 정보

follow us