아두이노 (아날로그)조이스틱 쉴드킷

아두이노에 장착가능한 쉴드형태의 조이스틱 만들기킷입니다.
느낌좋은 엄지손가락 조이스틱과 4개의 버튼스위치, 무지무지 긴 다리를 가진 재적재가능한 아두이노용 헤더 4개가 제공됩니다. 물론 리셋버튼은 기본입니다.

*부품만 제공하며, 직접 조립해야합니다.

Description: The SparkFun Joystick Shield Kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it’s relatively easy and requires minimal tools. We even have a step by step guide!

The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

Kit Includes:

• 1x Joystick Shield PCB
• 4x Momentary Push Button Switch - 12mm Square
• 1x Thumb Joystick
• 1x Mini Push Button Switch (breaks out Arduino’s reset switch)
• 2x 6-pin Arduino Stackable Header
• 2x 8-pin Arduino Stackable Header

Documents:

• Schematic
• Eagle Files
• Joystick Assembly Tutorial
• Joystick Quickstart Guide
• Arduino Sample Sketch
• GitHub