EL Wire로 휴대용 작품을 만드실때 건전지만 넣어주시면 되는 편리한 인버터 내장형 배터리 케이스입니다.   EL Wire를 2개까지 연결 하실 수 있습니다. 아트로봇샵에서 주문하신 EL Wire나 EL Pannel의 경우 커넥터까지 호환되므로 그냥 꽂아주시면 됩니다.

본체에 있는 스위치를 누를때마다 아래의 상태로 변환됩니다.

꺼짐 -> 저속깜빡임 -> 고속깜빡임 -> 항상켜짐 -> 꺼짐-> .. (이후 반복)

주의.  EL Wire를 미장착한 상태로 전원을 켜면 인버터가 고장날 수 있으니 꼭 장착한 상태에서 전원을 켜주시기 바랍니다.

Description: Even though the Tron movies have been out for a while, electroluminescence is still the coolest thing since sliced bread. The only downer is carrying around a battery pack and bulky external inverter. Good news, we've found a slim battery-powered inverter for your next small EL project! This little black box takes two AA batteries and has two JST connectors for your EL wire/panel/tape. There are two modes: continuous on and flashing and it even has a belt clip!

We got a chance to play with these inverters and you can easily hack these to work with our Li-Po batteries (yep, at the fully charged 4.2V). To get inside, you'll need to remove a pair of screws (one is hiding under the CE sticker) and afterwards you'll want to wrap things up with electrical tape to avoid getting shocked (it just tingles a little).

The following current readings were taken while the pack was connected to one or more of our 3m EL wire:

• Single strand always on: 190 to 260mA
• Single strand blinking: 90 to 120mA
• Two strands always on: ~300mA
• Two strands blinking: ~150mA

Different color strands were used but the lengths were identical. Your mileage may vary. If you need to pick up some Li-Po batteries, electrical tape or EL wire to hack your own battery pack, check the related items below!

Dimensions: 20 x 34 x 90mm