[아두이노]  

[TP11166]정품 아두이노 이더넷 쉴드 2 SD메모리 쉴드겸용 R3 (Arduino Ethernet Shield 2)

상품 정보
판매가
할인판매가 52,000원 (52,000원 할인)
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

0원(0%)

무통장 결제시 적립금%

카드 결제시 적립금%

실시간 계좌이체시 적립금%

적립금 결제시 적립금%

휴대폰 결제시 적립금%

예치금 결제시 적립금%

에스크로 결제시 적립금%

가상계좌 결제시 적립금%

가상계좌 결제시 적립금%

케이페이 결제시 적립금%

페이나우 결제시 적립금%

페이코 결제시 적립금%

카카오페이 결제시 적립금%

제휴적립금
배송방법 택배
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만 2,700원
  • 2.00kg 이상 ~ 80.00kg 미만 3,000원
닫기
상품 추가설명 번역정보
배송
수량 up down  
상품 목록
상품 정보 가격 삭제
총상품금액(수량)0
buy
buy
상품 상세페이지는 손가락으로 확대/축소가 가능합니다.


DESCRIPTION

The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the Internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. It supports up to eight simultaneous socket connections. Use the Ethernet library to write sketches that connect to the Internet using the Shield. The Ethernet Shield 2 connects to an Arduino Board using long wire-wrap headers extending through the Shield. This keeps the pin layout intact and allows another Shield to be stacked on top of it.

There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega (using the Ethernet library). The onboard micro-SD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4. The original revision of the Shield contained a full-size SD card slot; this is not supported.

The shield also includes a reset controller, to ensure that the W5500 Ethernet module is properly reset on power-up. Previous revisions of the Shield were not compatible with the Mega and needed to be manually reset after power-up. The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO Board. The Ethernet Shield 2 has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled but please be aware that this shield does not come with a built in PoE module. The PoE module that you will need is a separate component that must be added on. This shield also features several TinkerKit input/output and communication interfaces that can be found on the topside of the board.


FEATURES

  • • Operating voltage 5V (supplied from the Arduino Board)
  • • Ethernet Controller: W5500 with internal 32K buffer
  • • 2x TinkerKit Inputs, Outputs, and TWI Pins Each
  • • Connection speed: 10/100Mb
  • • Connection with Arduino on SPI port

DOCUMENTS

배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일

배송에 대해 알려드려요

01. 결제(입금완료)완료 후 2-3일이내에 상품을 수령하실 수 있습니다. 02. 재고가 없거나 다시 재입고 될 경우(예약상품, 구두포함) 5-7일이 소요됩니다. 03. 배송비는 5만원 이상 구매시 무료 5만원 미만 구매시 2500원의 배송료가 있습니다.

교환/반품시 반드시 확인해주세요.

반품은 반드시 정해진 택배사를 이용해주세요. 반드시 고객센터나 게시판을 통해 반품의사를 알려주신 후 제품을 보내주셔야 합니다. 연락없이 보내실경우 반품 및 교환이 불가능합니다. 반품 및 교환에 대한 자세한 사항은 아래의 내용을 참고해주세요.

교환/반품이 불가능한 경우입니다.

제품을 받으신 후 일주일 이내에 교환, 반품신청을 하지 않았을 경우 고객님의 부주의로 인한 상품이 변형, 훼손 또는 파손 된 경우 제품이 오염되었을 경우 (립스틱, 화장품, 음식물 기타 오염물질로 인해) 제품을 착용 및 사용하거나, 제품의 택(라벨)이 제거 했거나, 제품을 수선, 수리, 세탁하였을 경우 반품 불가로 표기 된 상품을 구매한 경우 (니트류, 화이트계열, 세일상품 등) 반품 의사를 통보하지 않고 반품한 경우

ITEM REVIEW

상품후기쓰기 모두보기

글읽기 권한이 없습니다.

19세 미만의 미성년자는 출입을 금합니다.

성인인증하기

ITEM REVIEW

상품후기쓰기 모두보기

글읽기 권한이 없습니다.

19세 미만의 미성년자는 출입을 금합니다.

성인인증하기

판매자 정보

follow us