판매가 | |
---|---|
할인판매가 | 29,000원 (29,000원 할인) |
할인금액 |
총 할인금액 원 (모바일할인금액 원) |
적립금 |
300원(1.00%) 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% 원% |
제휴적립금 | |
배송방법 | 택배 |
배송비 | 2,700원 ~ 3,000원 |
상품 추가설명 번역정보 |
배송 | |
---|---|
수량 |
상품 정보 | 가격 | 삭제 |
---|---|---|
총상품금액(수량)0 |
총 40개의 RGB LED를 개별 색상 제어가능한 아두이노용 쉴드입니다.
칼라픽셀 전반적인 소개글: http://learn.adafruit.com/adafruit-neopixel-uberguide
아래의 영문자료에 링크된 응용법 소개 튜토리얼도 함께 참고하시기 바랍니다.
Put
on your sunglasses before putting this shield onto your 'duino - 40
eye-blistering RGB LEDs adorn the NeoPixel shield for a blast of
configurable color. Arranged in a 5x8 matrix, each pixel is individually
addressable. Only one pin (Digital #6) is required to control all the
LEDs. You can cut a trace and use nearly any other pin if you need some
customization.
To make it easy to start, the LEDs are by default powered from the 5V onboard Arduino supply. As long as you aren't
lighting up all the pixels full power white that should be fine. If you
want to power the shield with an external power supply, solder in the
included terminal block (pro-tip: put it on the bottom of the board so
it doesn't stick up) to wire in an external 4-6VDC power supply - that
power supply will also power the Arduino and shield. If you want to use
the terminal block to power the shield but keep the Arduino itself on DC
or USB power only, cut the center of the solder jumper to the right of
the terminal block. There's a polarity protection FET on the external
input in case you wire the power backwards (we would never do that, it
was, umm, a friend of ours, yeah that's it!)
If, say, you need
MORE blinky, you can chain these together. For the second shield,
connect the DIN connection to the first shield's DOUT. Also connect a
ground pin together and power with 5V. There you go! You can chain as
many as you'd like although after 5 or more shields you may run low on
RAM if you're using an UNO.
We include both stacking headers and
plain headers. Use whichever you prefer - there isn't a lot of space
left over for the 'duino pin breakouts so if you want to wire up some
other outputs or sensors the stacking headers are good. For a slim
sturdy look, solder on the plain headers.
Our
detailed NeoPixel Uberguide has everything you need to use NeoPixels in
any shape and size. Including ready-to-go library & example code
for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo,
Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)
Note: The terminal blocks included with your product may be blue or black.
Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix (7:43)
Details:
01. 결제(입금완료)완료 후 2-3일이내에 상품을 수령하실 수 있습니다. 02. 재고가 없거나 다시 재입고 될 경우(예약상품, 구두포함) 5-7일이 소요됩니다. 03. 배송비는 5만원 이상 구매시 무료 5만원 미만 구매시 2500원의 배송료가 있습니다.
반품은 반드시 정해진 택배사를 이용해주세요. 반드시 고객센터나 게시판을 통해 반품의사를 알려주신 후 제품을 보내주셔야 합니다. 연락없이 보내실경우 반품 및 교환이 불가능합니다. 반품 및 교환에 대한 자세한 사항은 아래의 내용을 참고해주세요.
제품을 받으신 후 일주일 이내에 교환, 반품신청을 하지 않았을 경우 고객님의 부주의로 인한 상품이 변형, 훼손 또는 파손 된 경우 제품이 오염되었을 경우 (립스틱, 화장품, 음식물 기타 오염물질로 인해) 제품을 착용 및 사용하거나, 제품의 택(라벨)이 제거 했거나, 제품을 수선, 수리, 세탁하였을 경우 반품 불가로 표기 된 상품을 구매한 경우 (니트류, 화이트계열, 세일상품 등) 반품 의사를 통보하지 않고 반품한 경우