전체상품목록 바로가기

본문 바로가기


현재 위치
  1. home
  2. 전원 및 배터리
이전상품 다음 제품 보기
[아두이노]

[TA904] 전류센서 모듈 (INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max)

기본 정보
판매가 [vat별도] 9,500원
수량 수량증가수량감소
브랜드 Adafruit(에이다프릇)
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 80.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TA904] 전류센서 모듈 (INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
주문 불가

with item

위 상품과 함께 구매하시면 좋은 상품입니다. 상품을 선택하시면 함께 구매하실 수 있습니다.

사용법 안내 튜토리얼을 참고하세요!

https://learn.adafruit.com/adafruit-ina219-current-sensor-breakout

 

DESCRIPTION

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC current draw over I2C with 1% precision.

Most current-measuring devices such as our current panel meter are only good for low side measuring. That means that unless you want to get a battery involved, you have to stick the measurement resistor between the target ground and true ground. This can cause problems with circuits since electronics tend to not like it when the ground references change and move with varying current draw. This chip is much smarter - it can handle high side current measuring, up to +26VDC, even though it is powered with 3 or 5V. It will also report back that high side voltage, which is great for tracking battery life or solar panels.

A precision amplifier measures the voltage across the 0.1 ohm, 1% sense resistor. Since the amplifier maximum input difference is ±320mV this means it can measure up to ±3.2 Amps. With the internal 12 bit ADC, the resolution at ±3.2A range is 0.8mA. With the internal gain set at the minimum of div8, the max current is ±400mA and the resolution is 0.1mA. Advanced hackers can remove the 0.1 ohm current sense resistor and replace it with their own to change the range (say a 0.01 ohm to measure up 32 Amps with a resolution of 8mA)

We include a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load. Usage is simple. Power the sensor itself with 3 to 5VDC and connect the two I2C pins up to your microcontroller. Then connect your target power supply to VIN+ and the load to ground to VIN-. We have an Arduino library right now that will do all the gain, range and math for you - just plug and go! We'll have a more detailed tutorial up shortly.

 

TECHNICAL DETAILS

 

LEARN

Build a Cloud-Connected ESP8266 Power Meter

Measure the DC power consumption of your devices!
Pro Trinket Power Meter
Build a small meter to display voltage, current, and power usage.
Low Power WiFi Datalogger
Log sensor data with an Arduino and CC3000 for days on batteries!
Adafruit INA219 Current Sensor Breakout
Measure high side voltage and DC current draw over I2C
 


배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일
  • 배송 안내

    - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
    - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

    - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

    - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

ITEM REVIEW상품의 사용후기를 적어주세요.

상품후기작성 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품사용후기
no subject writer data hit 평점
1 만족 네이버 페이 구매자 2018-11-04 22 5점  
  1. 1

ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

상품문의등록 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
no subject writer data hit
6 핀 연결에 대하여 박솔 2014-04-28 3
5 핀 연결에 대하여 아트로봇 2014-04-29 94
4 문의요 김병국 2013-08-20 96
3 문의요 아트로봇 2013-08-21 94
2 INA219 문의 김병국 2013-07-02 105
  1. 1
  2. 2