전체상품목록 바로가기

본문 바로가기


이전상품 다음 제품 보기
[아두이노]

[TA519] 전도성 고무줄 (Conductive Rubber Cord Stretch Sensor + extras)

기본 정보
판매가 [vat별도] 10,400원
수량 수량증가수량감소
브랜드 Adafruit(에이다프릇)
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 80.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TA519] 전도성 고무줄 (Conductive Rubber Cord Stretch Sensor + extras) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
주문 불가

고무줄 같이 잡아당길수 있는 소재이면서, 늘어나거나 줄어들때 저항값이 변하는 전도성 고무줄입니다.

안내. 늘어나거나 줄일때 그에 비례하여 저항값이 변하지는 않습니다. 힘에 비례하여 저항변화 측정이 어려우며, 단순히 저항값의 변화를 감지하는 정도로 활용하실 수 있습니다. 처음 사용시 고무줄을 힘껏 늘려 놓고 사용하면 조금더 저항 변화 파악이 용이할 수 도 있으니 참고하시기 바랍니다.


  • Description

    Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing, but its also very fun to play with.

    In a 'relaxed' state, the resistance is about 350 ohms per inch. As you pull on it, the resistance increases (the particles get further apart). As you stretch it out, the resistance increases. So lets say you have a 6" piece - thats about 2.1 Kohms. Stretch it to 10" long and now it is 10"/6"*2.1K = 3.5 Kohms. You can stretch the rubber about 50-70% longer than the resting length, so a 6" piece shouldn't be stretched more than 10". Once the force is released, the rubber will shrink back, although its not very 'fast' and it takes a minute or two to revert to its original length. It's not a true linear sensor, and the resistance may vary from batch to batch, so we consider it a way to measure stretching motion but isn't really precise.

    This stuff is fun, so we give you a full meter and also two alligator clips (to connect to the cord) and a 10K resistor. Together, you can use these to make a simple voltage divider. Then use our handy Thermistor tutorial to measure the analog voltage and convert that back to resistance.


  • TECHNICAL DETAILS

    Length: approximately 1 meter = 39 inches
    Diameter: 2mm
    Resistance: 350-400 ohms per inch / 140 - 160 ohms per centimeter


    We give you a full meter and also two alligator clips (to connect to the cord) and a 10K 1% resistor. Together, you can use these to make a simple voltage divider. Then use our handy Thermistor tutorial to measure the analog voltage and convert that back to resistance.

배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일
  • 배송 안내

    - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
    - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

    - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

    - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

ITEM REVIEW상품의 사용후기를 적어주세요.

상품후기작성 모두보기

게시물이 없습니다

ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

상품문의등록 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
no subject writer data hit
4 불안정한 센서값 조절방법 민혜령 2014-01-28 125
3 불안정한 센서값 조절방법 아트로봇 2014-01-28 139
2 질문이요 ^^ 장은석 2013-10-07 2
1 질문이요 ^^ 아트로봇 2013-10-08 100
  1. 1