전체상품목록 바로가기

본문 바로가기


이전상품 다음 제품 보기
[아두이노]

[TA1376M5]미국 adafruit 정품 RGB 칼라픽셀 미터당 30개 스트립형 5미터- 실리콘 커버 보호 (Adafruit NeoPixel Digital RGB LED Weatherproof Strip 30 LED -5m)

기본 정보
판매가 [vat별도] 96,000원
수량 수량증가수량감소
브랜드 Adafruit(에이다프릇)
상품간략설명 아두이노로 30개의 RGB 칼라픽셀을 개별 색상 제어 가능한 제품
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 80.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TA1376M5]미국 adafruit 정품 RGB 칼라픽셀 미터당 30개 스트립형 5미터- 실리콘 커버 보호 (Adafruit NeoPixel Digital RGB LED Weatherproof Strip 30 LED -5m) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
주문 불가

개별 색상 제어가 가능한 RGB 칼라픽셀이 30개 포함된 스트립형 제품입니다.

전원선 2개와 신호 전달용 전선 1개만 사용되므로, 아두이노 IO핀 한개만 사용하여 수십개의 칼라픽셀 제어가 가능합니다. 또한 연결 가능한 모듈 수에 제한이 없어서 1개씩 잘라서 개별 사용하거나  필요한 수량만큼 수십개를 직렬연결하여 확장하여 사용할 수 있습니다. (단, 수량이 많아질 수록 고전력의 전원을 사용해야합니다.)

안내. 제품 소개사진에 있는 제어용 아두이노 보드, 전원, 커넥터등은 별매품이며 포함되어 있지 않습니다. 5미터 포장 제품을 1미터단위로 분할 판매하는 제품이어서 대부분의 제품에 전선이 연결되어 있지 않으며 이경우 제어선 및 전원선의 결합을 위해 납땜이 필요합니다. 

관련상품 (함께 구매하시면 좋은 제품)

  1. 전원  본제품은 총 30개의 칼라픽셀 전원 공급을 위해 정전압 5V에  출력전류가 2A 이상인 정전압 전원이 요구됩니다. 5V 2A 정전압 아답터를 함께 구매하시면 좋습니다.
  2. 정전압 아답터 DC잭을 편리하게 연결하려면 DC전원 커넥터(스크류형) 제품을 참고하시기 바랍니다.  또는 좀더 저렴한 DC잭 제품 및  브레드보드용 DC잭도 참고하세요.

 주의사항.

  • 화살표를 꼭 확인하세요.  제어 신호핀 입력은 꼭 입력측에 연결하셔야합니다.
  • GND선은 두가닥을 납땜하고 하나는 정전압 전원에, 나머지 하나는 아두이노 GND에 연결해주셔야합니다.
  • +5V 선은 아두이노 5V선에 연결하시면 안됩니다. 꼭 별도의 5V 2A이상 정전압 아답터 전원을 사용하셔야합니다. 단, 모듈을 소량( 가령 3개)으로 잘라서 사용하실경우는 아두이노 5V 전원으로도사용 가능할수 있습니다.

 자세한 사용법 및 예제소스는 튜토리얼 페이지에 안내가 되어있으니 사용전에 꼭 참고하시기 바랍니다. http://learn.adafruit.com/adafruit-neopixel-uberguide/arduino-library

한글 사용법 안내글.  영문 튜토리얼이 익숙치 않은 분들을 위해 기본적인 내용을 한글 튜토리얼로 공개하였습니다.. 보러가기 링크: http://robobob.co.kr/91

 기타 세부사항 확인을 위해 영문 튜토리얼도 꼭 함께  참고하시기 바랍니다

 

 

DESCRIPTION

You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED stripbut we will prove you wrong! These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with white flex PCB, its identical to the black 30 LED/meter except it has a different color mask on the flex strip

There are some things to watch for:

  • These LED's use about 9.5 Watts max (~2 Amps @ 5V) per meter. The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as our 5V 2A or 10A supply is key!
  • Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, and with a little effort you can use with the Raspberry Pi, or Beagle Bone Black, but it will not work with the Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our DotStar digital LED strip which has SPI-like input/output and works easily with Pi, NETduino, and other processors.
  • The way the pixels are controlled by an Arduino, the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, you may need to use a Mega.

There are 30 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you

The strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 1.3"/3.4cm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V/2A supply that should be able to drive 1 meter and a 5V/10A supply that can drive up to 10 meters(depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip

As of May 20, 2014 these come in 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with two connectors. If you buy less than 5m, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!

To wire up these strips we suggest picking up some JST SM plug and receptacle cables. You'll want one of each, one wire is for ground the other is for signal. For the power wire, you will also probably want a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it.

Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)

//www.youtube.com/embed/HO6xQMR8naw

//www.youtube.com/embed/WwKis1vek0U

//www.youtube.com/embed/JS3pKG_GoeI?rel=0&start=658&autoplay=0

Adafruit NeoPixel Digital RGB LED Weatherproof Strip 30 LED -1m (10:58)

 

 

TECHNICAL DETAILS

Technical specs:

  • 12.5mm (0.5") wide, 4mm (0.16") thick with casing on, 33mm (1.3") long per segment
  • 30 LEDs per meter
  • Removable IP65 weatherproof casing
  • Maximum 5V @ 60mA draw per 1.3" strip segment (all LEDs on full brightness)
  • 5VDC power requirement (do not exceed 6VDC) - no polarity protection
  • 1 integrated RGB LEDs per segment, individually controllable
  • LED wavelengths: 630nm/530nm/475nm
  • Connector: 2-pin JST SM
  • WS2812 Datasheet
  • SK6812 Datasheet
  • May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol

LEARN

MicroPython Smart Holiday Lights

Decorate with MicroPython-powered holiday lights you control from a web page!
Glowing WhoVille Hat
Be the brightest Who in Whoville
3D Printed IoT On Air Sign for Twitch

3D Printed IoT On Air Sign for Twitch

Make an internet connected On Air Sign
Alohamora Bottle
Cast a magic spell with capacitive touch

Festive Feather Holiday Lights

Create festive holiday lights powered by Adafruit's feather boards!
Techno-Tiki RGB LED Torch

Techno-Tiki RGB LED Torch

Turn a Tiki torch into a beautiful animated LED light display.
Citi Bike Helmet
Navigation & visibility with FLORA!

 

 


 

Adafruit NeoPixel Überguide
Everything you always wanted to know about Adafruit NeoPixels but were afraid to ask

 

 

 

 

Using NeoPixels with Netduino Plus 2
It used to be impossible to use NeoPixels with Netduino, until now!

 

 

 

 

Larson Scanner Shades (Trinket-Powered NeoPixel LED Strip Glasses)
A simple cyberpunk/Tronpunk fashion project!

 

 

 

 

NeoPixel Cyber Falls Wig
This Trinket project is really quite hairy!

 

 

 

Flora+NeoPixel LED Skateboard Upgrade
Flora+NeoPixel skateboard upgrade for maximum ground effects

 

 

 

 

Gemma-Powered NeoPixel LED Sound Reactive Drums

 

Light up your drums with sound.

 

 

 

 

WiFi Controlled LED Christmahanukwanzaa Tree
Control NeoPixels through the web to light up a tree for any holiday occasion!

 

 

 

 

3D Printing with NinjaFlex
Print your next creation in flexible material with ninja flex.

 

 

 

 

FLORAbrella

 

Bring your own rainbow

 

 

 

NeoPixel Basketball Hoop
Light up your mini or full sized basketball hoop with Gemma and NeoPixels.

 

 

 

 

 

1,500 NeoPixel LED Curtain with Raspberry Pi and Fadecandy
Make Something Beautiful. And Bright. Really Bright.

 

 

 

 

 

 

Trinket NeoPixel LED Longboard
Upgrade your ride with lots, and lots of NeoPixels!

 

 

 

 

 

NeoPixels on Raspberry Pi
How to control NeoPixel LEDs with Python on a Raspberry Pi!

 

 

 

 

 

 




배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일
  • 배송 안내

    - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
    - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

    - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

    - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

ITEM REVIEW상품의 사용후기를 적어주세요.

상품후기작성 모두보기

게시물이 없습니다

ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

상품문의등록 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
no subject writer data hit
2 이 제품 입고는 언제쯤 되나요? 엄재준 2016-05-23 202
1 이 제품 입고는 언제쯤 되나요? 아트로봇CT 2016-05-23 701
  1. 1