전체상품목록 바로가기

본문 바로가기


현재 위치
  1. home
  2. 센서(Sensors)
이전상품 다음 제품 보기
[아두이노]

[TA1063] 마이크 프리 앰프 - 사운드 센서 (Electret Microphone Amplifier - MAX4466 with Adjustable Gain)

기본 정보
판매가 [vat별도] 10,900원
수량 수량증가수량감소
브랜드 Adafruit(에이다프릇)
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 80.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TA1063] 마이크 프리 앰프 - 사운드 센서 (Electret Microphone Amplifier - MAX4466 with Adjustable Gain) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
주문 불가

감도 조절이 가능한 마이크로폰 내장된 프리앰프(사운드 센서)입니다.  입력된 소리를 증폭하여 출력해주며  이 신호를 활용하면 단순히 주변소리를 감지하능 용도나 뮤직 비주얼라이저를 제작할 수 있게 됩니다.  아두이노에서 입력된 소리를 변조하여 Wav쉴드등으로 출력하면 실시간 휴대용 음성변조기기 제작(동영상 및 관련 튜토리얼 참조)도 가능합니다.

알림. 뒷면에 장착된 트리머를 회전하여 원하는 감도(gain 이득)를 설정할 수 있습니다.

 

DESCRIPTION

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!

This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6" away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!

Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the "quietest" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.

The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.

For audio-reactive projects, we suggest using an FFT driver library (such as the one in this library) which can take the audio input and 'translate' it into frequencies. Also, check out this awesome Voice Changer project that uses this mic and an Adafruit Wave Shield!

//www.youtube.com/embed/WwKis1vek0U

//www.youtube.com/embed/7FbK4wA7hjc

https://www.youtube.com/embed/eRdSi4gJz98

 
 

LEARN

Sound Reactive NeoPixel Peace Pendant
Make this sound reactive NeoPixel LED peace pendant and help radiate some love!!
LED Masquerade Masks
Light up the party!
Ursula's Seashell Necklace
Steal Ariel's Voice (and her man) with SCIENCE
Costume Triggers & Actuators
Interactive Halloween
VU Meter Baseball Hat
Sound sensitive NeoPixel cap
3D Printed LED Microphone Flag
Build a sound reactive LED microphone flag
Gemma-Powered NeoPixel LED Sound Reactive Drums
Light up your drums with sound.
3D Printed Animatronic Robot Head
An entry-level robotics / animatronics project.
3D Printed Wireless MIDI Controller Guitar
Make your own awesome wireless MIDI controller guitar for rocking out
Trinket Sound-Reactive LED Color Organ
Add sound reactive color to your tunes.
FFT: Fun with Fourier Transforms
Analyzing audio signals with Teensy 3.0
Electronic Demon Costume
RAAAAAWR!
LED Ampli-Tie
Wearable VU meter necktie with Flora
Adafruit Microphone Amplifier Breakout
Measure Sound Levels with the Adafruit Microphone Amplifier
Tiny Arduino Music Visualizer
Maximum blinkenlights, minimum effort!
Wave Shield Voice Changer
Speak like everyone's favorite baritone Sith lord or sing along with the Lollipop Guild!
 
 
 
 
 



배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일
  • 배송 안내

    - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
    - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

    - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

    - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

ITEM REVIEW상품의 사용후기를 적어주세요.

상품후기작성 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품사용후기
no subject writer data hit 평점
1 만족 네이버 페이 구매자 2018-08-25 56 5점  
  1. 1

ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

상품문의등록 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
no subject writer data hit
29 납땜문의 김진아 2017-09-02 272
28 납땜문의 아트로봇CT 2017-09-02 376
27 상품문의 장선아 2016-05-09 3
26 상품문의 아트로봇CT 2016-05-10 2
25 재고보유?? 신대영 2016-04-08 359
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5