전체상품목록 바로가기

본문 바로가기


현재 위치
  1. home
  2. 전원 및 배터리
이전상품 다음 제품 보기
[아두이노]

[TSC12781] EL 시퀀서 아두이노 호환 보드 - 최신형 (SparkFun EL Sequencer)

기본 정보
판매가 [vat별도] 40,000원
수량 수량증가수량감소
브랜드 Sparkfun(스파크펀)
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 80.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TSC12781] EL 시퀀서 아두이노 호환 보드 - 최신형 (SparkFun EL Sequencer) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
주문 불가

with item

위 상품과 함께 구매하시면 좋은 상품입니다. 상품을 선택하시면 함께 구매하실 수 있습니다.

12월 5일에서 8일 사이 입고예정입니다.


Description:

The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of electroluminescent wire. EL wire is flexible plastic cord that glows brightly when high-voltage AC is applied to it. It’s available in numerous colors (see the related products below), runs cool, and requires very little current, but can be difficult to work with because of the high-voltage requirements. The EL Sequencer can safely switch high-voltage AC on and off, allowing you to easily create animated displays or whatever else your imagination can come up with.

In addition to this board, you will need an inverter (a component that generates the high-voltage AC needed by EL wire), EL wire/tape/panels, and a 5V FTDI BOB or cable to load your own programs. The board also has headers for XBee and NRF24L01+ radio modules for wireless projects. SparkFun carries two inverters, a 3V-input version that can drive a few feet of EL wire, and a 12V-input version capable of driving dozens of feet of EL wire. Choose the one appropriate to your power source and driving requirements. The EL Sequencer possesses zero-crossing optoisolated triacs for noise-free operation and full isolation between the AC and DC sides, and includes a 1.5A adjustable linear regulator to supply regulated DC to an external inverter (not included).

Nate has used EL wire to make amazing interactive costumes; check out his Heartbeat Straitjacket and demo video.

Note: We have fixed the silkscreen error on this board; the FTDI “black” and “green” labels have been fixed.


Features:

  • • ATmega 328p running at 8MHz, with Arduino bootloader
  • • Eight opto-isolated, zero-crossing EL control channels
  • • Headers for XBee and NRF24L01+ for optional wireless control
  • • No library needed - control is as easy as turning a LED on and off
  • • Integrated 1.5A linear regulator (LM317) to supply regulated DC power to external inverter
  • • Linear regulator preset to 3.3V, but can be changed via PTH resistors, or bypassed entirely
  • • Can be powered by a 3.7V Lipo battery (using 3V inverter), or an external 3.3V to 16V supply (using 3V or 12V inverter)
  • • 5V FTDI BOB or cable required for reprogramming, not included
  • • External EL inverter required, not included


Documents:




배송정보

  • 배송 방법택배
  • 배송 지역전국지역
  • 배송 비용2,700원 ~ 3,000원
  • 배송 기간1일 ~ 2일
  • 배송 안내

    - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
    - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

    - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

    - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

ITEM REVIEW상품의 사용후기를 적어주세요.

상품후기작성 모두보기

게시물이 없습니다

ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

상품문의등록 모두보기

글읽기 권한이 없습니다.

"19세 미만의 미성년자"는 출입을 금합니다!

성인인증 하기

상품 Q&A
no subject writer data hit
26 재고문의 오의진 2016-08-09 170
25 재고문의 아트로봇ST 2016-08-09 170
24 이 기판에 2pin 커넥터는 몇mm짜리를 써야 하나요? 장기원 2014-09-19 163
23 이 기판에 2pin 커넥터는 몇mm짜리를 써야 하나요? 아트로봇 2014-09-22 150
22 문의사항 김광섭 2014-08-14 3
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5