전체상품목록 바로가기

본문 바로가기


이전상품 다음 제품 보기
[아두이노]

[TA1246 ] 빛 감지용 센서 - 플로라형 ( Flora Lux Sensor - TSL2561 Light Sensor - v1.0 )

기본 정보
판매가 [vat별도] 9,000원
수량 수량증가수량감소
브랜드 Adafruit(에이다프릇)
상품간략설명 플로라형 칼라센서입니다. i2c 디지탈 통신으로 연결하여 사용합니다
국내·해외배송 국내배송
배송비 2,700원 ~ 3,000원
도움말

구매조건에 따라 배송비 차등부과

  • 1.00kg 이상 ~ 2.00kg 미만2,700원
  • 2.00kg 이상 ~ 80.00kg 미만3,000원
닫기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

상품 옵션
옵션 선택
상품 목록
product name quantity price
[TA1246 ] 빛 감지용 센서 - 플로라형 ( Flora Lux Sensor - TSL2561 Light Sensor - v1.0 ) 수량증가 수량감소 ()
TOTAL(ea) : 0 (0개)
주문 불가
  • DESCRIPTION

    Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from up to 0.1 - 40,000+ Lux on the fly. The best part of this sensor is that it contains both infrared and full spectrum diodes! That means you can separately measure infrared, full-spectrum or human-visible light. Most sensors can only detect one or the other, which does not accurately represent what human eyes see (since we cannot perceive the IR light that is detected by most photo diodes)

    The sensor has a digital (I2C) interface. Attaching it to the flora is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one lux sensor to your Flora, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side. The current draw is extremely low, about 0.5mA when actively sensing, and less than 15 uA when in powerdown mode.

    Check our our Flora Lux Sensor tutorial, the conventional TSL2561 tutorial, and you can use our Arduino library-- the example and library code will work 'out of the box' with Flora.





    Flora Lux Sensor - TSL2561 Light Sensor (16:50)

  • TECHNICAL DETAILS

    • 0.55"/14mm diameter, 0.07"/1.8mm thick
    • Approximates Human eye Response
    • Precisely Measures Illuminance in Diverse Lighting Conditions
    • Temperature range: -30 to 80 *C
    • Dynamic range (Lux): 0.1 to 40,000 Lux
    • Voltage range: 2.7-3.6V
    • This board/chip uses I2C 7-bit addresses 0x39, 0x29, 0x49, selectable with jumpers.

    Datasheets, EagleCAD PCB files, and Fritzing object available in the product tutorial

    • LEARN

      TSL2561 Luminosity Sensor
      Low power, digital luminosity (light) sensor
      Flora TSL2561 Lux Sensor
      Wearable luminosity sensing!
      FLORA Sensors
      All the feels!
      Datalogging Hat with FLORA BLE
      Log Light Levels to Adafruit IO
      I2C addresses!
      I2C addresses from 0x00 to 0x7F (inclusive)

    배송정보

    • 배송 방법택배
    • 배송 지역전국지역
    • 배송 비용2,700원 ~ 3,000원
    • 배송 기간1일 ~ 2일
    • 배송 안내

      - 품절이나 주문상품 아이콘이 없는 제품은 하나 이상의 재고를 보유하고 있습니다.
      - 산간벽지나 도서지방의 경우 별도의 추가금액을 지불하지 않으셔도 됩니다. 전국동일 (제주도 포함)

      - 결제( 입금완료 )완료 후 1~2일 이내에 주문하신 제품을 받아 보실 수 있습니다. ( 우체국택배 )  단,  품절 또는 주문상품( 해외수입 )의 경우 1~2주 정도 소요됩니다.

      - 교환/반품의 경우 수령한 날로부터 7일까지 가능합니다. 단, 포장을 개봉하여 재판매가 불가할 경우 교환/반품이 불가합니다.

    ITEM REVIEW상품의 사용후기를 적어주세요.

    상품후기작성 모두보기

    게시물이 없습니다

    ITEM Q&A상품에 대해 궁금한 점을 해결해 드립니다.

    상품문의등록 모두보기

    게시물이 없습니다